ÓPTIMA PLATES

DESCRIPTION

OPTIMA plates have been specially designed for mining and chemical projects. Óptima plates can be chamber or membrane.

The standard chamber filter plates allow to reach very adequate filtration solutions and cover a wide spectrum of applications.
Together with the membrane plates, they reduce the cycle times, the residual humidity of the cake and allow the cross washing / drying of the cake.

MAIN ADVANTAGES:

OPTIMA plates provide the benefits of a standard plate and incorporates the following advantages:

Greater filtering surface because the feed is outside the filtering surface.
Higher feeding speed due to the OPTI-DRAIN design for filtered liquid evacuation.

Higher efficiency in washing – drying cakes, because the orifices are located outside the flooding zone of the filtering surface.

OPTIMA MEMBRANE plates have removable membranes, allows for a full expansion in the empty chamber, improve the efficiency in washes and cake drying because the evacuation outlet is above the filtration area.

TECHNICAL DETAILS:

FORMAT:

Standard sizes from 250 mm up to 2000

CONFIGURATION:

Open or closed with different feeding options.

PRESSURE:

Up to 16 bar.

TEMPERATURES:

Up to + 90 Cº

MATERIALES:

Polypropylene homopolymers / Copolymers
Polypropylene homopolymers / FDA Copolymers
Anti-static polypropylene
PVDF
Antistatic PVDF
Other materials upon request
Membranes are available in thermoplastic elastomers, EPDM, NBR, FKM..
A combination of different materials is used for the composition of the body and the membrane.

The standard system (gasketted)is a system with a gasket and a second gasket to secure the filtration fabric.

The CLIP ON system is a perimeter gasket incorporated in the filtration fabric itself.

Its design allows an easy assembly / disassembly and reduces filtration fabric replacing times.

INDUSTRIAL APPLICATIONS OF THE FILTER PRESSES

IRON AND STEEL INDUSTRY

MINING AND CERAMIC INDUSTRY

CHEMICAL INDUSTRY

FOOD INDUSTRY

FOR MORE INFORMATION ABOUT APPLICATIONS

TERMS OF SALE

PRICES

The specified prices are EX WORK, according to incoterms 2010, in our facilities at Riells i Viabrea in Girona (Spain) and excludes the tax, as well as the packaging, if not previously specified in the proposal.

The prices are based on the cost of the materials and workmanship at the time that the proposal is made. If a change occurs after the time the order is accepted by us, and or until the delivery date, we reserve the right to adjust our fabrication costs to the new terms. The agreement would be subject to the official pricing revision formula.

All the equipment adjustments that are carried out, outside of CLEVER FILTRACION and caused by the conditions of the installation site, or by variations related to the product to be treated, will be charged to the client.

DELIVERY TIME

The delivery time in our factories is as specified in the proposal, according to the present situation, if there is a time lapse between the order is received and the customer’s decision making process. Please consult us for the current delivery time.

We reserved the right to make constructive, or other technical changes.

All the supplied equipment shall remain our ownership until complete satisfaction of all payments and obligations due to us, have been made by the customer as stated in the terms of order.

INSTALLATION

If the installation and startup are not included in the proposal, we will offer you our specialized installers whose cost will be billed in accordance with the current prices.